|
东陆风华帐号全站通用,包括论坛、商城、网络家园等站点,登陆查看更精彩内容
您需要 登录 才可以下载或查看,没有帐号?注册东陆风华通行证
x
:3:
第九专题第三部分:
Press Esc to exit FDISK 按Esc退出FDISK
This drive is FAT16 by default, switch to FAT32 (Y/N)? 这个驱动器默认是FAT16模式,真的转换为FAT32模式吗
This drive must be FAT32 because its size is > 2048 MB 当分区的空间大于2048MB时,这个分区必须使用FAT32磁盘数据格式
This drive must be FAT16 because its size is too small to be FAT32 因为这个分区对于FAT32格式来说太小,所以这个分区只能使用FAT16格式
Verifying drive integrity, complete 正在校验分区的完整性,完成
Your computer has NTFS partitions which may require large drive support. If you are using another operating system, such as Windows NT, which supports large drives you should enable treating these partitions as large 你的计算机有一个NTFS分区可能需要大分区支持,如果你正在使用其他操作系统,如Windows NT,你应该把这些分区分大一些
NOTE: If you answer Y and the partition display looks incorrect or a hang or crash occurs do nothing, run FDISK again, and answer N to this question 注意:如果你回答Y,可能显示的分区信息看上去不正确或系统挂起或什么动作也没有,这时你可再次运行FDISK,对这个问题用N回答
Should NTFS partitions on all drives be treated as large (Y/N)? 对所有的NTFS分区使用大分区模式
Drive deleted 驱动器被删除
Partition made active 分区X被设置为活动
Primary DOS Partition created 主DOS分区被建立
Extended DOS Partition created 扩展DOS分区被建立
Logical DOS Drive created, drive letters changed or added 逻辑分区被建立,驱动器的盘符可能被改变或有新的增加
No partitions defined 没有分区被定义
No logical drives defined 没有逻辑驱动器被说明
Drive letters have been changed or deleted 驱动器盘符已经被改变或删除
No active partitions 没有设置活动分区,该硬盘不能被启动
No fixed disks present 没有硬盘
Error reading fixed disk 读硬盘错误 |
|